Medicine Processing WL-300 Commercial Corn Grinder Machine For Livestock Feed

The comminution chamber is composed of shell, door, spindle, turbine assembly, screen assembly, feed hopper and discharge tube, etc. It mainly uses eddy current on the back of turbine blade to finish crushing the material. When working, the motor drives the spindle and the turbine to rotate at high speed. Because the turbine keeps a very small gap with the teeth on the screen ring, the material entering the machine is ground again in the gap of the rotating airflow. In the process, the turbine absorbs a large amount of air. It has the function of cooling machine, abrasive and conveying fine powder. What is different is that a certain number of moving needles and static needles are added to the turbine and the door respectively to reach the material entering the comminuted area. The purpose of material pre-crushing. At the same time, the plane gear ring is added to the door, which is consistent with the outer side of the blade face, so that the coarse particles which are not fully comminuted cannot run out of the comminuted cavity. The fineness of the material depends on the properties of the material and the aperture of the screen and the throughput of the material and air..

1. This machine has the advantages of compactstructure, stable operation, convenient installation and maintenance (no foundation), small area, large production capacity, no dust pollutionand so on.

2. The comminution ratio is large, the commonlyused raw material is within 10mm, and the crushingfineness is adjustable in the range of 20-325 mesh.

3. The equipment produces a large amount of air and a good self-cooling function, so it can also be used for some heat- sensitive materials.

4. This machine is a high speed turbine pulverizer with high efficiency, large power crushing capacity, low operating cost, reasonable configuration of the whole system and low cost of one-timeinput.

This machine is widely used in chemical industry, dyestuff, pigment, paint, pesticide, food, feed, plastic, non-metal ore and so on. It is suitable for crushing soft and low hardness materials such as brittleness and fiber.

Q1: Wonder if you accept small orders?

A1: We accept small order. MOQ of our grinder is 1 piece.

Q2: Can you send products to my country?

A2: Sure, we can deliver our grinding machine to all of the countries in the world.

Q3: Can you do OEM / ODM for me?

A3: We accept all OEM / ODM orders, We can customize various dry powder crushing equipment according to customer requirements.

Q4: What's your payment terms ?

A4: By T/T or LC AT SIGHT; 50% deposit, balance 50% before shipment.

Q5: How long is the lead time?

A5:It depends on product and order quantity. Normally, it takes us 30 days for an order with MOQ quantity.

Q6: When can I get the quotation ?

A6: After receiving the customer's inquiry, we will analyze the customer's request. If the technical parameters provided by the customer are sufficiently complete, we will quote within two working days. If the information provided by the customer is not enough, we will quote the price within two working days after receiving the supplementary information provided by the customer.

Q7: What is your after-sales model?

A6: a, the customer informs and describes the problem;
b, After-sales department analyzes the problem;
c. The after-sales department can guide customers to solve problems remotely (through text, pictures,

video, telephone or video calls) based on past experience;
d, if you need to replace parts. During the warranty period, the seller is responsible for the delivery and

postage. Outside the warranty period, the seller is responsible for sending the accessories, charging

the cost of the accessories, and the buyer providing the postage.